KAWASAKI CONCOURS 14 ABS

The Kawasaki 1400GTR, also known as the Concours 14 or ZG1400 in some markets, is a motorcycle produced by Kawasaki. The 1400GTR was introduced in September 2007 and is based on the ZX-14 platform. It replaces the original GTR1000 (Concours), which was built from 1986 to 2006.The engine is a transverse-mounted 16-valve inline-four with a displacement of 1,352 cc (82.5 cu in). It features variable valve timing, derived from a Mitsubishi Motors car engine, which allows the phasing of the intake camshaft to be advanced by up to 24°. At the time of its launch in 2007, it was the only motorcycle engine to feature variable valve timing.The fuel injected engine on the 2008 and 2009 models has a power output of 114 kW (153 hp) at 8,800 rpm and produces torque of 136 N·m (100 ft·lbf) at 6,200 rpm. The ram-air intake on the 2010 model increases power to 117.6 kW (157.7 hp).Tetra Lever rear drive systemThe bike's rear suspension-drive system is known as Tetra-Lever and is similar to the BMW Paralever and Moto Guzzi CARC systems. It is designed to handle the conflicting drive and suspension forces (known as shaft effect) typical when shaft-driven motorcycles carry powerful engines.The 1400GTR is fitted with a keyless ignition, KIPASS (Kawasaki’s Intelligent Proximity Activation Start System),[which means that no key is needed to start the bike as long as the rider is carrying the coded transponder—typically in a pocket.From launch the 1400GTR had the option of an anti-lock braking system (ABS). In 2010, Kawasaki added KTRC, a traction control system, and replaced the previous ABS systems with K-ACT (Kawasaki Advanced Coactive-braking Technology), an improved system with power-assisted brake force redistribution. K-ACT is also a combined braking system in which both the front and rear brakes are applied in differing amounts depending on whether the front brake lever or rear brake pedal is used. The rider is able to select, using a handlebar switch, the amount of front brake force applied when the rear brake pedal is used. The traction control uses the ABS sensors to detect when the front and rear wheel speeds differ—reducing rear wheel speed by telling the engine management system to reduce power output.

이름 찾아 삼만리님의 파란블로그에서 발행된 글입니다.